Aluminium shutter doors for shops and warehouses with a side motor and manual chain.
Automatic Roller Doors
Heat-coated slats, Herculift and Long Lift motors with rolling-code remotes.
The roller door suits shops, warehouses and garages. Its slats carry a heat-resistant coating, and it runs on a rolling-code remote motor with a manual release.
Heat-resistant coated slats from 0.48 mm sheet Rubber bottom seal against dust and insects Nylon side guides for quiet movement Easy lock for manual use
Try it yourself
Design your roller door
Pick a colour and size, open and close the door, and rotate the model to watch the slats wind onto the drum.
In the model: the motor unit on the right end of the drum, the manual-release cable with its red handle, and the control box on the wall. Once the door is up, the car drives out of the garage.
Colours and sizes are indicative; we confirm what is available and any custom size on WhatsApp.
Specifications
| Sheet thickness | 0.48 mm |
|---|---|
| Motor voltage | 220 V, 50/60 Hz |
| Pulling force | 380 N |
| Remote frequency | 433.92 MHz |
| Manual release | By cable |
Herculift and Long Lift motors
Australian specification, rolling-code remote with over 4.29 billion combinations, and a manual release by cable.
- Rolling code
- 433.92 MHz
- 380 N
- Cable release
FAQ
Automatic Roller Doors
Can the remote be copied?
The remote uses a rolling code with over 4.29 billion combinations.
How do I open it by hand?
Release the motor with the dedicated cable.
You may also need
Insulated 40 mm steel panels with a US-made LiftMaster opener.
Shade, dust and noise protection with Somfy and Jolly motors.
Ready for a quote on your door?
Send us a photo of the opening and its size on WhatsApp and we will reply.